National Calculation Method NCM
The National Calculation Method (NCM) is defined by the Department for Communities and Local Government (DCLG). It describes the procedure, for buildings other than dwellings, for demonstrating compliance with the carbon emission requirements of regulation 17C of the Building Regulations and for calculating ‘operational ratings’ and ‘asset ratings’ in the production of Energy Performance Certificates (EPC’s) in relation to the Energy Performance of Buildings Directive (EPBD).
The NCM provides the underlying method and the standard data sets necessary to calculate the annual energy use of a proposed building and comparing it with the energy use of a ‘notional' building of a similar type, under similar circumstances. This is done by calculating the Target Emission Rate (TER - the CO2 emission rate) for the notional building and comparing it with the Building Emission Rate (BER) for the proposed building. The BER must not be higher than the TER.
The calculations can be performed using approved simulation software (Approved Dynamic Simulation Models (DSMs)) or by using the Simplified Building Energy Model (SBEM), a ‘simplified’ compliance tool developed by BRE, which has a user interface called iSBEM.
[edit] Related articles on Designing buildings Wiki
- Approved building energy calculation software.
- Approved documents.
- Building Regulations.
- Dynamic Simulation Model.
- Emission rates.
- Energy Performance Certificates.
- Energy Performance of Buildings Directive.
- Passivhaus vs SAP.
- Simplified Building Energy Model.
- Standard Assessment Procedure.
[edit] External references
- National Calculation Method.
- National Calculation Methodology (NCM) modelling guide (for buildings other than dwellings in England and Wales) 2010 Edition.
Featured articles and news
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA has launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.